◎ ORBIT × MUSICSPACE

TEN CONTROLS · NINETEEN CONSTRAINTS · ONE INSTRUMENT

A constellation of constraints.

Pull one control. See the connections. Hear the whole instrument respond.

Loading instrument…
CONSTRAINTS INSIDE ORBIT19 active constraints
Drag first, then let the springs settle.

Start with Bass: its movement redistributes Body and Air. Click 01 to isolate that relationship.

What the nineteen constraints do

Explore the network

  1. Start sound, then drag Bass: Body and Air share the remaining level.
  2. Select 03 and drag Cutoff. Resonance follows the fixed-length link.
  3. Select 04. The two rays show the Rate / Depth distance ratio.
  4. Release a relationship with its switch and compare.
  5. Turn on Animate springs, then pull Air or Depth.

Read the geometry

Dashed lines indicate balances, solid bars fixed distance, rays radial ratios, dotted lines minimum separation, coils springs, and arcs angular constraints. Numbered badges match the inspector. Range guides show the shared bounds.

The display follows the actual engine scene, including disabled rules. Red links and an inspector warning mean a geometric relation is outside solver tolerance. Springs are intentionally elastic. An angle or distance ratio describes geometry; it does not imply the same ratio between Hz or other parameter units.

Dynamics start paused for precise exploration. Undo restores the complete geometry and constraint settings. Native preset recall keeps the stored sound and recaptures geometric targets. Technical notes